Footprint Performance

Footprint Performance

FOOTPRINT PERFORMANCE

FOOTPRINT PERFORMANCE

Plug n play performance chip

The plug n play performance chip reads data from the engine control unit(ECU) in real time, and optimise many characteristics. Data include items such as injection timing, injection quantity, injection pressure, boost pressure, air mass and vehicle timing.

At Footprint Performance we source different products, which will ensure that you get the best possible product for your vehicle and something that will cater for your own specific need.

 *All  data presented are maximum values and  will differ per vehicle, even of the same manufacture

    • Fully digital equipment
    • Easy installation
    • Sturdy aluminium casing
    • Traceless set back
    • No follow-up costs
    • Manual and Automatic transmissions
    • Lifetime guarantee
    • Long-term tested
    • Same motor service life as in factory conditions
    • 14-day money back guarantee if not 100% satisfied
  • Performance chip statistics:

    • Power at 126 kW , increased to 160 kW + 27%
    • Power in PS – 171 HP, increased to 218 HP + 27%
    • Torque – 360 Nm, increased to 428 Nm, + 19%
    • Example based on a Toyota Hilux/Fortuner 3.0 D-4D
PedalBox
  • The PedalBox is installed between the accelerator pedal sensor and the control module and works by capturing the accelerator pedal signal and transforming it. This is a fantastic option to enhance driving pleasure on normal aspirated and turbo vehicles, and does not affect the vehicle warrantee as it does not alter the engine in any way.

    Lots of manufacturers offer similar functions via standard “Sports/ECO buttons”. The PedalBox reduces the pedal travel necessary in order to reach a “throttle wide open” state (full throttle response). 

    pedalbox

  • This allows the driver to exploit the full potential of the engine, and throttle lag will almost be completely eliminated.

    The PedalBox has four user-selectable programmes, that increases throttle response by removing delays in the accelerator, enhancing driveability. If driving style is adjusted, the PedalBox can even allow fuel consumption to be reduced. The four modes available are, SPORT mode, SPORT Plus mode, ECO mode and OFF.

  • PedalBox

    PedalBox

    Only R2795,

    including installation/courier

    You’ll be impressed – If not, you’ll get your money back.

  • Click to Check Vehicle Availability
  • Greater control. Pedalbox Adjustment.

    All drivers face a wide range of driving conditions and situations. The PealBox allows drivers to choose between four levels, each with three seperate modes offering improved response. The PedalBox includes different programmes tailored to meet the most drivers range of driver’s wishes. The driver can select the programme most suited to the driving situation.

  • Reduced response time. More dynamic.

    Moments of delay are a thing of the past. The signal is immediately followed by the response, giving the driver the feeling that he or she is accelerating faster. However, the torque remains the same. It is merely the response ratios that have improved.

  • Maximum efficiency. Greater driving pleasure.

    Once responsiveness has improved, driving is a lot more fun. Plus, quick acceleration without any delay gives drivers the feeling of being in better control of their vehicle.

  • Practical and beneficial.

    Modifying the values set by the manufacturer therefore has advantages. The PedalBox will meet the expectations of customers and their cars. The often delayed throttle response of modern engines is gone, while retaining the standard engine control unit.

  • wpf42c99c0_05_06

    Pedalbox CurvePedalbox

  • The “Throttle Response” curve shows the speed at which an engine responds to the driver’s pressing of the accelerator. Deficiencies are evident here, especially at times of strong acceleration.

    Throttle response has less to do with how much power a vehicle has but rather how long it needs to fully release this power, with petrol engines frequently performing better here than diesel ones in this regard.

Stage 1 Chip Tuning
    • X-treme chip – Stage 1 Chip Tuning

      The X-treme chip uses the 32-bit ARM Cortex III™ micro controller of the Cortex- series made by ARM and is enormously powerful. With its 48 MHz-clocking processor that delivers 48 million/sec communications to your ECU, this chip is perfect for High Performance gains from your vehicle and much quicker and smoother responses are delivered to your vehicles fuel management system. It provides maximum increases to turbo petrol engine performance of up to 20 %.

      • The X-treme Chip uses a sturdy fiberglass casing.
      • Suitable for Stage 2 installations
      • Suitable for both Diesel and Petrol Turbo vehicles

    • Only R3995,

      Including installation/courier

Stage 2&3 Chip Tuning

Multi-map technology Chip Tuning

Chip tuning with multi-map technology means that four to eight data maps are stored in the memory and suitably retrieved depending on the desired driving behaviour. This gives an optimum match of the control parameters in each performance range.The processors used are of particular importance. For them what is important is not the maximum number of map operations (arithmetic operations / sec.), but the fact that the calculation cycle corresponds exactly to that of the main engine control unit.This is the only way to ensure that fine scanning of the grid is possible in real-time and the protection functions of the ECU (main control unit) are unaffected.

Self-learning auto calibration Chip Tuning

Another development is the ability of systems to learn the unique characteristics of their vehicle. During a short run-in period, the memory function gathers the individual data on the different injection cycles. The information obtained serves as a basis for optimization. This way, standard tolerances are compensated for and the best results obtained for each vehicle – without any complicated manual settings.

DTE Systems_logo

Click to Check Vehicle Availability

  • PDI System (Stage 2) – Diesel

    PDI systems consisting of high-tech electronics and is well protected by a special, heat and acid-resistant plastic. Connects to the vehicle’s injector plugs. The increase in performance would be around 30%. Additional power is achieved depending on rpm by changing the amount of fuel injected relative to the load conditions. Injector units offer the best tuning available for a vehicle to date.

    The PDI has four user-selectable programmes, that increases engine power by up to 30%. If driving style is adjusted, the unit can even allow fuel consumption to be reduced by up to 15%. The four modes available are, SPORT mode, SPORT Plus mode, ECO mode and Towing mode.

    Custom tuning is available by data logging injector values and making sure that the unit performance optimally for your specific vehicle.

  • connecting_dte
  • DTE-systems

    From only R6495,

    including installation/courier

  • PDI10-System (Stage 3) – Diesel

    With the exclusive PDI10 system up to eight parameters can be changed via various sensors. Additional power is achieved depending on rpm (if necessary) by changing the amount of fuel injected in relation to a change in the boost pressure. The maximum of eight parameters include amount of fuel injected, boost pressure, air mass, rpm, temperature and load conditions.

    The PDI10 system consists of high-tech electronics and is well protected by a special, heat and acid-resistant plastic. Completely waterproof!

    The cable harness is equipped with a maximum of ten connections and is checked electronically several times before shipment. The sturdy 18-pin connector from the automotive sector is specially designed for tough conditions. The adapter plugs are manufactured in OEM quality. No soldering or cutting any wires is necessary. Just connect it up and it’s done!

    The PDI10 has four user-selectable programmes, that increases engine power by up to 30%. If driving style is adjusted, the unit can even allow fuel consumption to be reduced by up to 15%. The four modes available are SPORT mode, SPORT Plus mode, ECO mode and Towing mode.

  • Chip Tuning

    From only R7495,

    including installation/courier

  • PDI10
  • CRD-09/10/14 (Stage 2/3)- Diesel

    Tuning with multi-map technology means that four to eight data maps are stored in the memory and suitably retrieved depending on the desired driving behaviour. This gives an optimum match of the control parameters in each performance range.

    Three modes available; SPORT, SPORT Plus and ECO mode for easy adjustment to suit driving style or conditions.

    The Chiptuning box is subject to the strict quality controls at DTE-Systems GmbH. This guarantees that you, the customer, will receive a perfect product.

    Diesel particulate filter compatible

    Another advantage of current units with multi-map technology is the fact that they adhere to the legal emissions prescribed for the vehicle. Due to the optimized combustion across all performance ranges the fuel is used 100% efficiently – smoke and soot are history.

From R5995,

including installation/courier

Chip Tuning

  • FSR-System (Stage 3)- Petrol

    With the exclusive FSR system up to eight parameters can be changed via various sensors. Additional power is achieved depending on rpm (if necessary) by changing the amount of fuel injected in relation to a change in the boost pressure. The maximum of eight parameters include eg: amount of fuel injected, boost pressure, air mass, rpm, temperature and load conditions.

    Three modes available; SPORT, SPORT Plus and ECO mode for easy adjustment to suit driving style or conditions.

    The FSR system consists of high-tech electronics and is well protected by a special, heat and acid-resistant plastic.

    The cable harness is equipped with a maximum of seven connections and is checked electronically several times before shipment. The sturdy 18-pin connector from the automotive sector is specially designed for tough conditions. The adapter plugs are manufactured in OEM quality. No soldering or cutting any wires is necessary. Just connect it up and it’s done!

    The FSR system is subject to the strict quality controls at DTE-Systems GmbH. This guarantees that you, the customer, will receive a perfect product.


  • DTE-systems
KONTAK
[]
1 Step 1
Navrae
Naamnaam en van
Telefoon Nommerselfoon of telefoon
KommentaarDie maak model en jaar van voertuig

 
0 /

Kontak:
info@footprintperformance.co.za
Jaco Dippenaar: +27 83 675 8364
Natalie Dippenaar: +27 83 679 3198

Footprint Performance
Addres: 12 Ria Street   Helderkruin  1724

Previous
Next